Features of the plastic mold parts of the parting locks
Time：
2020-05-11
Author：
wmould
Source:
en.wmould.com
mould standard parts
Material: Japanese nylon resin + SCM435
Features of the Velcro opener and closure for mold accessories:
1. The friction between the template and the nylon can be adjusted by locking the conical screw;
2. Good wear resistance and heat resistance.
Installation Guidelines:
· The Nylon by itself has heat resistant temperature of 150C. But use it at 80"C orless because thedurability will reduce due to tightening stress by the conical bolt in the practically continuous use.
Its can process the "R"angle for the hole to insert on the mold, and also by using a PL BS bushing that isspecially designed.
parting,locks,，mould,standard,parts
ADDRESS
Headquarters：5 Block, HuaFeng Science and Technology Park,GuangTian Rd. 3rd Industrial District, Luotian Community, Yanluo Street, Bao'an ShenZhen,518105, China.
Thailand Branch：สุขนิเวศน์ 10 มาบข่า-ระยอง ที่อยู่ 188/155 หมู่ 8 ตำบลมาบข่า อำเภออนิคมพัฒนา จังหวัดระยอง 21180。
Headquarters：service@wmould.com